Silent Call Signature Series Wireless Doorbell Transmitter

Features

• Silent Call Signature Series Wireless Doorbell Transmitter is ideal for homes without doorbells, or for side doors or back doors where doorbells have not been installed
• Battery operated and not intended for wiring to existing doorbell circuitry
• Combines the doorbell button and transmitter in one compact, easy-to-install unit
• Range upto 2000 feet
• Low battery indicator
• Includes:
  - Wireless Doorbell 418 MHz Transmitter
  - One 12 volt battery
  - Mounts easily with two small screws
  - Product manual

More Information

• Installation:
  - Remove your Silent Call wireless doorbell transmitter from its packaging
  - Place the doorbell transmitter firmly against the wood frame on the outside door trim, approximately 48 inches up from the doorsill. Note that if the doorbell transmitter is mounted to a metal surface, the range will be greatly reduced
  - Using a pencil, mark each screw hole on the mounting surface. Remove the doorbell transmitter from the wood trim
  - Using a small nail or other sharp pointed object, make a starter hole for transmitter case screws (included)
  - Screw transmitter to door trim making sure printing on the case is right side up
  - To test operation of transmitter, press doorbell button. This will cause your Silent Call Signature Series receiver to operate
• Changing Battery:
  - Remove doorbell transmitter from doorframe and slide battery cover off, exposing battery
  - Remove battery and install new 23AE, 12 volt alkaline battery
  - Make sure polarity (+ and -) is correct when installing new battery
• Operation:
  - Whenever the doorbell transmitter button is pressed, a coded wireless signal is sent to any Silent Call Signature Series receiver, causing it to activate
  - Transmission range is determined by which Signature Series receiver you are using